Equipment Reviews
In-depth resin equipment reviews with full spec tables — pressure pots, vacuum chambers, UV curing stations, and more.
- 3M Half-Face Respirator 6502QL Review: Organic Vapor Protection for Resin Work
3M 6502QL half face respirator organic vapor resin review: APF 10, Cool Flow valve, Quick Latch, and why the 60921 OV/P100 cartridge beats any N95 for fumes.
- Alcohol Ink Set Review for Resin: Jacquard Piñata vs Tim Holtz Ranger Ink
Hands-on alcohol ink set resin review: Jacquard Piñata vs Tim Holtz Ranger Adirondack for tinting epoxy. Dosing per ounce, lightfastness, saturation, and which set wins for resin.
- ArtResin Table Top Epoxy Review: Non-Toxic Formula for Canvas & Countertop
Hands-on ArtResin table top epoxy review: genuinely non-toxic (ASTM D4236, zero VOC), crystal-clear, HALS UV-stabilized — but only ~120F heat tolerant.
- American Weigh Scales LB-501 Digital Scale Review: 0.1g Accuracy for Resin Mixing Ratios
Hands-on AWS LB-501 review for resin mixing: 500g x 0.01g readability, 200g calibration weights, tare, AA/AC power, and where 0.01g resolution beats a 0.1g kitchen scale on small epoxy batches.
- California Air Tools 5-Gallon Steel Pressure Pot Review: Mid-Range Upgrade Worth It?
California Air Tools 365C 5-gallon pressure pot review for resin casting: real PSI, interior size, the gauge defect to check, and whether $280-$315 is worth it.
- JB Chef Butane Torch Review: Mini Crème Brûlée Torch for Resin Surface Bubbles
JB Chef butane torch review for resin: a ~2,370-2,500F adjustable blue flame that pops surface microbubbles on coasters and jewelry, for $15-$30.
- Kozyvacu TA350 3.5 CFM Two-Stage Vacuum Pump Review: Best Upgrade for Resin Makers?
Kozyvacu TA350 3.5 CFM vacuum pump resin review: it is actually SINGLE-stage at 5 Pa. Why that is already overkill for degassing epoxy and silicone.
- Let's Resin 36W UV Resin Lamp Review: Fast Curing for Jewelry and Coasters
Hands-on Let's Resin 36W UV lamp review: dual 365+405nm curing, 60-120 sec on thin jewelry, cordless USB-C scissor stand, and where it beats a 24W lamp.
- Let's Resin Jewelry Earring Mold Set Review: 30+ Shapes for Resin Earrings
Let's Resin jewelry earring mold set review: 171pc kit, 11 molds, 30+ cavity shapes, 80 hooks & jump rings. Best-value starter for thin UV-resin earrings.
- Let's Resin UV Resin Hard Type Review: Nail Lamp Curing for Jewelry & Coatings
Hands-on Let's Resin UV Resin Hard Type review: 2000 cps, up to 85D hardness, under 2% shrinkage, 3-5 min cure under a 36W nail lamp - and why it can't deep pour.
- Nitrile Gloves for Resin: Best Thickness & Brand Review (Mil Rating Comparison)
Nitrile gloves for resin reviewed by mil thickness: 4 vs 6 vs 8 mil and neoprene, the 30-minute rule, breakthrough indicators, and why acetone destroys nitrile fast.
- Resin Equipment Reviews: Pressure Pots, Vacuum Chambers, UV Lamps & More
Hands-on resin equipment reviews of pressure pots, vacuum chambers and UV lamps with real PSI, CFM, inHg and 405 nm specs to match the right tool to your resin.
- Robinair 15310 3 CFM Vacuum Pump Review: Budget HVAC Pump for Resin Degassing
Robinair 15310 3 CFM vacuum pump resin review: 75-micron HVAC-grade pump degasses epoxy flawlessly, but you pay 2-3x an identical import. Worth it?
- SUNUV SUN2C 48W UV Nail Lamp for Resin Review: Cheap Shortcut or Real UV Cure?
SUNUV SUN2C 48W review for resin: dual 365+405nm cures thin coats in 60-120s, but 2-3mm is the hard depth limit. Where this $40 nail lamp wins and fails.
- TCP Global 2.5-Gallon Pressure Pot Review: Best Budget Starter Pot Under $80?
Hands-on TCP Global 2.5 gallon pressure pot review for resin casting: real PSI, interior size, the paint-tank conversion, and whether the under-$80 price is legit.
- Temperature Controlled Resin Curing Cabinet Review: Accelerate Demold with Heat Curing
Hands-on review of the OFFNOVA temperature-controlled resin curing cabinet: 140-150F MCH ceramic heat, 0.5-9 hr timer, 6.5 in mold height, and how heat cuts epoxy demold from 24 hr to 2-3 hr.
- TotalBoat TableTop Epoxy Review: Bar Top & Countertop Self-Leveling Coat
Hands-on TotalBoat TableTop Epoxy review: 1:1 mix, 82 Shore D blush-free finish, 1/8-1/4 in flood coats, ~$60/gal value — but a 125F ceiling and limited food rating.
- TotalBoat ThickSet Deep Pour Epoxy Review: 4-Inch Single Pour for Big Casts
TotalBoat ThickSet deep pour epoxy review: the truth on the 4-inch single pour, real 1/2-2 inch depth limits, 1:1 mix, cure times, and ThickSet vs WiseBond.
- Powerfix Tumbler Spinner Resin Curing Machine Review: Even Coating at $45
Tumbler spinner resin curing machine review: why 3-4 RPM continuous rotation gives drip-free epoxy coats, what it can't do, and who needs a heated box instead.
- Wagner Furno 300 Heat Gun Review: Bubble-Busting Resin Torch Alternative
Wagner Furno 300 heat gun review for resin: dual 750/1100 degF, ~20 CFM, $25-$35. Where it clears micro-bubbles, where a torch still wins, and correct low-and-slow technique.
- WiseBond Deep Pour Epoxy 2-Inch Depth Review: River Tables Without Overheating
Hands-on WiseBond deep pour epoxy review for river tables: a 2-inch single pour, 2:1 mix, slow exotherm, 30-day cure, and genuine FDA food-safe status.
- Yellow Jacket 93600 5 CFM Two-Stage Vacuum Pump Review: Pro-Grade Resin Degassing
Yellow Jacket 93600 review for resin: it is actually a 7 CFM BulletX two-stage pump (25 micron), not 5 CFM. Why it is pro-grade overkill for degassing epoxy and silicone.
- Zenlogy 10-Piece Silicone Coaster Mold Set Review: Flat Back, High Clarity Results
Hands-on review of the Zenlogy 10-piece silicone coaster mold set: 4 round + 4 square + 2 holder molds, ~1 cm depth, resin-per-coaster numbers, and who should buy.
- Zeny 3-Gallon Vacuum Chamber with Acrylic Lid Review: See-Through Degassing for Resin
Zeny 3 gallon acrylic lid vacuum chamber review: real inHg, 5 Pa pump pairing, the acrylic-vs-glass solvent limit, and whether it's the right budget degassing pick.
- Alumilite Amazing Clear Cast Plus Review: Ultra-Clear Casting for Encapsulations
Alumilite Amazing Clear Cast Plus review: ultra-clear polyurethane casting resin for encapsulations, demold time 30 minutes, full cure 1 hour, 80 Shore D hardness, 0.5% shrinkage.
- Alumilite Resin Dispensing Pump Review: Automatic 2:1 Ratio Metering for Polyurethane
Review of the Alumilite Resin Dispensing Pump Set for automatic 2:1 ratio metering of Alumilite polyurethane resin.
- Pressure Pot + Compressor Bundle Review: TCP Global Kit vs California Air Tools Bundle
Compare the best pressure pot and compressor bundles for resin crafting, including TCP Global and California Air Tools kits.
- Bernzomatic TS8000 Propane Torch Review: Heavy-Duty Resin & Large Pour Work
Bernzomatic TS8000 propane torch review for resin crafting, covering heavy-duty applications and large pour work.
- California Air Tools 8010 Quiet Air Compressor Review: Pressure Pot Companion Under $200
Quiet air compressor review for resin crafting, comparing CAT-8010 to other options, ideal for beginners and hobbyists.
- Counter Culture DIY UltraClear Epoxy Review: DIY Bar Top in Quart Kits
Review of Counter Culture DIY UltraClear Epoxy for DIY bar tops in quart kits, including working time, cure time, heat resistance, and price.
- Fiskars Fingertip Craft Applicator Bottles Review: Precision Resin Dispensing for Detail Work
Optimize resin dispensing with Fiskars Fingertip Craft Applicator Bottles. Discover precision resin application for intricate detail work.
- Ecopoxy FlowCast Casting Epoxy Review: Low-Viscosity Crystal-Clear River Table Pour
Ecopoxy FlowCast Casting Epoxy review: a low-viscosity crystal-clear epoxy for river table pours, with a 2:1 mix ratio and 5-day full cure time.
- Resin Obsession Silicone Measuring Cups Review: Graduated Mixing for Accurate Ratios
Accurate resin mixing ratios with Resin Obsession Silicone Measuring Cups. 4-piece set with 1, 2, 4, and 8 oz sizes for precise pouring.
- Ingersoll Rand 1-Quart Pressure Pot Review: Professional Spray Gun Use vs Resin Casting
Ingersoll Rand 1-Quart Pressure Pot Review: Expert analysis of pressure pot performance for spray guns and resin casting applications.
- Lazy Susan Turntable for Resin Art Review: Level Pours and Geode Rotation
Level pours and geode rotation made easy with the Lazy Susan Turntable for resin art. Read our review to learn more.
- Let's Resin Silicone Mixing Mat Review: Spill Protection & Easy Cleanup
Expert review of the Let's Resin Large Silicone Mixing Mat—15.7x11.8in, heat-resistant to 500°F, ideal for spill-free resin projects.
- Mica Powder Pigment Set Review: 50-Color vs 24-Color Kits for Resin Art
Compare the best mica powder pigment sets for resin art, including the Let's Resin 50-Color and Jacquard Pearl Ex 24-Color sets.
- Milwaukee M12 Cordless Heat Gun Review: Worth $80 for Resin Work?
Milwaukee M12 Cordless Heat Gun review for resin work - is it worth the investment? Explore its features, pros, and cons.
- Mold Release Spray Review: Mann Release vs Ease Release 200 for Resin Casting
Compare Mann Ease Release 200 and Smooth-On Ease Release 200 mold release sprays for resin casting. Which is best for silicone, polyurethane, and epoxy molds?
- Mold Star 15 Slow Silicone Rubber Review: Make Your Own Resin Molds at Home
In-depth Mold Star 15 Slow silicone rubber review for resin mold making. Compare specs, pros, cons, and best practices for DIY projects.
- On Balance Scales 0.01g Precision Digital Scale Review: Pigment Dosing for Resin Art
Review of the On Balance Scales 0.01g Precision Digital Scale for resin art pigment dosing, precision, and accuracy.
- Pen Blank Tube Casting Mold Review: 6 Cavity Acrylic Mold for Lathe-Turned Pens
Discover the Penn State Industries 6-Cavity Pen Blank Casting Mold for lathe-turned pens. Our review covers its features, pros, and cons.
- Puduo 54W UV Resin Curing Lamp Review: High-Wattage Speed for Production Resin Makers
Puduo 54W UV Resin Curing Lamp review: high-wattage UV curing for resin makers, 54W, 365nm, 360-degree rotation.
- Resin Obsession Super Clear Epoxy Review: Artist Formula for Encapsulations and Coatings
Resin Obsession Super Clear Epoxy review: Pros, Cons, and Verdict for artists and crafters. Compare art coating epoxy formulas for encapsulations and coatings.
- Custom River Table Silicone Dam Mold Review: Build Your Own River Mold at Any Size
Create a custom river table silicone dam mold at any size with our expert review. Learn about the best river table silicone mold options and how to build a river table with ease.
- Silicone Dice Mold Set Review: Sharp Corners, 16mm vs 19mm, Pressure-Pot Performance
Resin dice mold set review of Let's Resin Dice Mold Set (16mm + 19mm) for sharp corners, pressure-pot performance, and more.
- Suncure 48W UV Curing Station Review: Larger Work Area for Bigger Resin Pieces
Expert review of the Suncure 48W UV curing station—365nm wavelength, 21x21cm workspace, and timer settings for resin projects. Compare specs and performance.
- TP Tools 2.5 Qt Mini Pressure Pot Review: Jewelry & Small Casts Under $60
TP Tools 2.5 Qt Mini Pressure Pot review: 60 PSI steel tank for flawless resin jewelry under $65. Ideal for small casts.
- UV Conveyor Curing Box Review: Production-Scale UV Resin Curing for Resin Sellers
Discover the BGREAT UV Curing Box 385nm/405nm for efficient production-scale UV resin curing. Read our review to learn more.
- Vevor 10-Gallon Pressure Pot Review: Large River-Table Pours at $120
Read our Vevor 10-Gallon Pressure Pot review to see if this large pressure pot is right for your resin river table pours. Compare it to other top pressure pots.
- Vevor 5-Gallon Stainless Steel Vacuum Chamber Review: High-Volume Silicone Degassing
High-volume silicone degassing with the Vevor 5-Gallon Stainless Steel Vacuum Chamber review. Compare features, pros, and cons.